Sports netting by the metre
Specifications
| Product | Polyester netting by the metre, cut and sewn to order |
|---|---|
| Material | Polyester (factory photo-verified on all combinations) |
| 10 x 10 mm (0.39 in) mesh | 1 mm (0.04 in) or 2 mm (0.08 in) twine |
| 20 x 20 mm (0.79 in) mesh | 1 mm (0.04 in), 2 mm (0.08 in), 3 mm (0.12 in) or 4 mm (0.16 in) twine |
| 30 x 30 mm (1.18 in) mesh | 3 mm (0.12 in) twine |
| 45 x 45 mm (1.77 in) mesh | 4 mm (0.16 in) twine |
| 50 x 50 mm (1.97 in) mesh | 5 mm (0.20 in) or 6 mm (0.24 in) twine |
| 100 x 100 mm (3.94 in) mesh | 4 mm (0.16 in) or 5 mm (0.20 in) twine |
| Processing | Weaving, cutting, sewing, packaging per supplier listing |
| Lead time | Supplier states 10-60 days after payment, plus freight |
When to use it
Use it when
Your dimensions, mesh or colour do not match a standard product and you want netting specified from combinations the factory actually documents.
Do not use it when
You need a finished net with band, cable or fittings ready to hang: those are separate programmes, so ask for the finished product instead of raw netting.
Common buying mistake. Ordering by the metre without stating the finished panel dimensions and edge finish. Cutting and sewing are part of the service; a drawing with dimensions avoids paying twice for rework.
Documented sourceable specifications
Polyester Netting by the Metre, 10 mm (0.39 in) mesh, 2 mm twine
Fine containment mesh for small balls and debris screening
| Material | Polyester (factory sample) |
|---|---|
| Mesh | 10 x 10 mm (0.39 x 0.39 in) |
| Twine diameter | 2 mm (0.08 in) |
| Format | Cut and sewn to order |
Polyester Netting by the Metre, 30 mm (1.18 in) mesh, 3 mm twine
Intermediate mesh for barriers and equipment netting
| Material | Polyester (factory sample) |
|---|---|
| Mesh | 30 x 30 mm (1.18 x 1.18 in) |
| Twine diameter | 3 mm (0.12 in) |
| Format | Cut and sewn to order |
Polyester Netting by the Metre, 100 mm (3.94 in) mesh, 5 mm twine
Wide perimeter mesh for large-ball containment
| Material | Polyester (factory sample) |
|---|---|
| Mesh | 100 x 100 mm (3.94 x 3.94 in) |
| Twine diameter | 5 mm (0.20 in) |
| Format | Cut and sewn to order |
Typical applications
- Replacement panels for existing installations
- Non-standard court and cage dimensions
- OEM and private label programmes
- Repairs and extensions of installed nets
How sourcing works
- Send your requirement through the quote form: sport or use case, dimensions, quantity, destination.
- We clarify the specification with you and confirm it in writing with our manufacturing partner.
- You receive a documented quote; first personal reply within 48 hours.
- On order: production, quality checks per agreed scope, and shipping coordination.
Frequently asked questions
How do I specify netting by the metre?
Four choices: mesh size, twine diameter, colour, and finished panel dimensions. The table above lists the 12 mesh and twine combinations documented at the factory; pick the closest and we confirm it against the sample photos.
How do I know these combinations actually exist?
Each combination in the table is photographed at the factory, most of them held in hand so the twine construction is visible. We share the photo of your exact combination with the quote.
Can panels be sewn with reinforced edges?
The supplier's processing includes cutting and sewing. Factory photos show finished edges on several samples. State the edge finish you need and we confirm it in the quote.
What if I need a combination that is not in the table?
The table is what is documented today, not necessarily the full production range. Ask for the combination you need and we put it to the supplier; we only confirm it once the supplier documents it.
Is there a minimum order?
Minimums vary by line: some products are listed from 1 sq m, others from 500 or 1,000 sq m. We state the applicable minimum in the quote rather than a blanket figure.
We reply within 48 hours with questions or a documented quote.